Page 7 - Catalogue_8 pages
P. 7
OL CAPPING
Liquid Photopolymer Application
Corrugated Printing Plate My Capping , the liquid photopolymer with great
hardness of 50 Shore A, is designed for capping
Mypol Capping is a 50 ShoreA hardness liquid onto the Mypol 20 or 25 ShoreA Mypol 21/A.
photopolymer formulated to be used with softer Technical Specification
polymer base. The hardness of this product assures Packaging: product will be delivered in plastic UV
the best printing performance while the softer base protected IBC tanks of 1000 Kg, 200kg steel drums
polymer provides maximum compressibility. It is or 18 kg pails or jerry cans.
highly recommended to be used onto Mypol 20 or Product warranty : The product is recommended to
Mypol 21/A with 25 ShoreA for best printing be used within 12 months from its production date.
results. It must be stored in adequate temperature and
protected from light and heat. Warranty is valid for
Mypol Capping is available in transparent colour 12 months + transport time.
(colourless).
REPRODUCIBILITY :
Key Features Points net (half tone dot area) 3-95% at 40 lines/cm
(100 l/inch)
Tack free printing plate Thin (fine) lines : 0,18 mm (0,007 inch) in width
High resolution printing
Wide imaging latitude delivers exceptional PLATE PROCESSING
details printing results My Capping is available with hardness 50 Shore A.
Great durability and no cupping issue Viscosity 26,000 – 34,000 mPa x sec at 25 deg
celcius
Appearance Colourless
*For a better performance we recommend printing
plates to be stored at temperature between 10 and
30 degrees Celsius, with relative humidity at 60%.
Plates should be protected from sun and UV light.
INDICATIVE TREATMENTS TIME RECOMENDATION :
(Plate times changes according to thickness and
different type of equipment used for production)
INDICATIVE TIME 2,84 mm 3.94 mm
Pre-exposure 3th0icskenceosnsds t4h0icskenceosnsds
Main exposure 230 seconds 270 seconds
Washing 10 minutes 10 minutes
wet exposure 10-20 minutes 10-20 minutes
*Wet exposure beyond the recommended timing
may affect the finished goods performance and
durability.
Liquid Photopolymer Application
Corrugated Printing Plate My Capping , the liquid photopolymer with great
hardness of 50 Shore A, is designed for capping
Mypol Capping is a 50 ShoreA hardness liquid onto the Mypol 20 or 25 ShoreA Mypol 21/A.
photopolymer formulated to be used with softer Technical Specification
polymer base. The hardness of this product assures Packaging: product will be delivered in plastic UV
the best printing performance while the softer base protected IBC tanks of 1000 Kg, 200kg steel drums
polymer provides maximum compressibility. It is or 18 kg pails or jerry cans.
highly recommended to be used onto Mypol 20 or Product warranty : The product is recommended to
Mypol 21/A with 25 ShoreA for best printing be used within 12 months from its production date.
results. It must be stored in adequate temperature and
protected from light and heat. Warranty is valid for
Mypol Capping is available in transparent colour 12 months + transport time.
(colourless).
REPRODUCIBILITY :
Key Features Points net (half tone dot area) 3-95% at 40 lines/cm
(100 l/inch)
Tack free printing plate Thin (fine) lines : 0,18 mm (0,007 inch) in width
High resolution printing
Wide imaging latitude delivers exceptional PLATE PROCESSING
details printing results My Capping is available with hardness 50 Shore A.
Great durability and no cupping issue Viscosity 26,000 – 34,000 mPa x sec at 25 deg
celcius
Appearance Colourless
*For a better performance we recommend printing
plates to be stored at temperature between 10 and
30 degrees Celsius, with relative humidity at 60%.
Plates should be protected from sun and UV light.
INDICATIVE TREATMENTS TIME RECOMENDATION :
(Plate times changes according to thickness and
different type of equipment used for production)
INDICATIVE TIME 2,84 mm 3.94 mm
Pre-exposure 3th0icskenceosnsds t4h0icskenceosnsds
Main exposure 230 seconds 270 seconds
Washing 10 minutes 10 minutes
wet exposure 10-20 minutes 10-20 minutes
*Wet exposure beyond the recommended timing
may affect the finished goods performance and
durability.
