Page 5 - Catalogue_8 pages
P. 5
OL 21/A
Liquid Photopolymer Application
Corrugated Printing Plate M21/A is a high quality liquid photopolymer
product specifically formulated for corrugated
Mypol 21/A is the standard liquid photopolymer cardboard printing.
for all types of corrugate cardboard. This liquid
photopolymer is a flexible solution, uniquely Technical Specification
formulated for flexographic print plates. Mypol Packaging: product will be delivered in plastic UV
21/A is available in different hardness levels: 25, 32 protected IBC tanks of 1000 Kg, 200kg steel drums
and 36 ShoreA. The products assure high quality or 18 kg pails or jerry cans.
tack free printing plate with great solids coverage Product warranty : The product is recommended to
and minimal dot gain. Good resilience, wide image be used within 12 months from its production date.
latitude, and superior durability are the other It must be stored in adequate temperature and
benefits from this product. protected from light and heat. Warranty is valid for
12 months + transport time.
Key Features
REPRODUCIBILITY :
Tack free printing plate for maximum coverage Points net (half tone dot area) 3-95% at 40 lines/cm
and clean finishing (100 l/inch)
Good resilience and excellent ink transfer Thin (fine) lines : 0,18 mm (0,007 inch) in width
Wide imaging latitude promises exceptional
results from fine details printing PLATE PROCESSING
Excellent durability, UV and thermal stability M21/A is available with hardness 25-32-36Shore A.
Viscosity 28,000 – 38,000 mPa x sec at 25 deg
celcius
Appearance Colourless, Pink or Orange
*For a better performance we recommend printing
plates to be stored at temperature between 10 and
30 degrees Celsius, with relative humidity at 60%.
Plates should be protected from sun and UV light.
INDICATIVE TREATMENTS TIME RECOMENDATION :
(Plate times changes according to thickness and
different type of equipment used for production)
INDICATIVE TIME 2,84 mm 3.94 mm
Pre-exposure 3th0icskenceosnsds t4h0icskenceosnsds
Main exposure 230 seconds 270 seconds
Washing 10 minutes 10 minutes
wet exposure 10-20 minutes 10-20 minutes
*Wet exposure beyond the recommended timing
may affect the finished goods performance and
durability.
Liquid Photopolymer Application
Corrugated Printing Plate M21/A is a high quality liquid photopolymer
product specifically formulated for corrugated
Mypol 21/A is the standard liquid photopolymer cardboard printing.
for all types of corrugate cardboard. This liquid
photopolymer is a flexible solution, uniquely Technical Specification
formulated for flexographic print plates. Mypol Packaging: product will be delivered in plastic UV
21/A is available in different hardness levels: 25, 32 protected IBC tanks of 1000 Kg, 200kg steel drums
and 36 ShoreA. The products assure high quality or 18 kg pails or jerry cans.
tack free printing plate with great solids coverage Product warranty : The product is recommended to
and minimal dot gain. Good resilience, wide image be used within 12 months from its production date.
latitude, and superior durability are the other It must be stored in adequate temperature and
benefits from this product. protected from light and heat. Warranty is valid for
12 months + transport time.
Key Features
REPRODUCIBILITY :
Tack free printing plate for maximum coverage Points net (half tone dot area) 3-95% at 40 lines/cm
and clean finishing (100 l/inch)
Good resilience and excellent ink transfer Thin (fine) lines : 0,18 mm (0,007 inch) in width
Wide imaging latitude promises exceptional
results from fine details printing PLATE PROCESSING
Excellent durability, UV and thermal stability M21/A is available with hardness 25-32-36Shore A.
Viscosity 28,000 – 38,000 mPa x sec at 25 deg
celcius
Appearance Colourless, Pink or Orange
*For a better performance we recommend printing
plates to be stored at temperature between 10 and
30 degrees Celsius, with relative humidity at 60%.
Plates should be protected from sun and UV light.
INDICATIVE TREATMENTS TIME RECOMENDATION :
(Plate times changes according to thickness and
different type of equipment used for production)
INDICATIVE TIME 2,84 mm 3.94 mm
Pre-exposure 3th0icskenceosnsds t4h0icskenceosnsds
Main exposure 230 seconds 270 seconds
Washing 10 minutes 10 minutes
wet exposure 10-20 minutes 10-20 minutes
*Wet exposure beyond the recommended timing
may affect the finished goods performance and
durability.
